Currie Extreme 60 Front Crate Axle Assembly (Eaton E-Locker - 5.38 Gear Ratio) - CE-LF6503E53

PRODUCT OVERVIEW

The Currie Extreme 60 high pinion front crate axle is simply the strongest 60 series axle that we offer, designed for extreme off-road use with up to 40-inch tires and V8 conversion horsepower. The Currie Extreme 60 is built to the legendary Currie Standard and loaded with exclusive features including: a stronger reinforced stage-2 radius bottom center section, ring gear load bolt, large 3.5-inch axle tubes and bigger brakes plus much more. If you seek out the most challenging routes and toughest obstacles to conquer then the Currie Extreme 60 is the crate axle of choice.

-13.25 inch vented rotors (over 1.25 inches larger diameter than stock for increased braking) with zinc plated caliper brackets
-Dual piston calipers with increased pad contact area for improved braking
-Currie Currectlync 1 5/8 inch diameter, .250 wall heat treated Chromoly tube with 1 1/4 inch forged tie rod ends
-Heavy gauge 3/16 inch steel mounting brackets with multiple mounting locations that enable the suspension geometry to be tuned
-Currie Johnny Joints installed with 1/2 inch greaseable bolts
-Optimized for 4 inch lift kits with 5 degrees of pinion angle to reduce driveshaft angle and 5 degrees of caster for improved steering
-Ram mounting brackets welded to housing, setup for PSC 8 inch travel steering ram
-70 inch wide (between wheel mounting surfaces), enables full turning angle with 40 inch tires
-6 lug (6 on 5 1/2 inch) with 1/2 inch studs installed or 8 lug (8 on 6 1/2 inch) with 9/16 inch studs installed
-Black satin powder coat