Fabtech 2.5 Inch Radius Arm Lift Kit with Stealth Shocks - FTS23156

PRODUCT OVERVIEW

Improving on the Rams new front suspension design this 2.5 inch System includes replacement tubular Radius Arms with Fabtechs exclusive dimple die side plates for superior strength and a rugged appearance. These new Radius Arms provide increased caster for use with oversized tires and lifted suspension heights. The stock front coil springs are mounted with angular steel spacers to retain the factory spring bow. This is an important feature as Chrysler designed this bow to aid in their unique alignment spec and ride quality. Flat spacers do not provide this. The front shocks are replaced with longer length units to allow for full suspension travel while improving the damping of the front suspension. Extended length bump stops are included in this kit to prevent the coil springs from binding at full compression while also eliminating Track Bar interference. This system will typically level the stance of the vehicle with no change to the rear suspension. Use 315/70R17 tire w/ 17x9 wheels w/ 4 5/8 inch BS w/ minor trimming. Use 325/65R18 tire w/ 18x9 wheels w/ 4 5/8 inch BS w/ minor trimming. Use 325/60R20 tire w/ 20x9.5 wheels w/ 5 inch BS w/ minor trimming.