Fabtech 6 Inch RTS Lift Kit with Stealth Shocks - K1051M

PRODUCT OVERVIEW

Fabtechs cutting edge RTs system has now been developed for the all new GM HD platform. The 6 inch RTs utilizes a patent pending bracket system that keep the torsion bars raised up, in the stock location. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when off-roading. The 6 inch RTs system has been designed with unitized bracketry to retain the four front compression stops of the vehicle as GM intended. This distributes impact loads across a wide section of the frame rather than at a single point. High arched crossmembers and front differential skid plate are constructed of 1/4 inch thick steel to resist bending from hard front suspension impacts. Only 1/4 inch thick steel provides the rigidity and strength necessary to relocate the torsion bars, bump stops and lower control arms properly. Minimal heavy duty bracketry allow for a fast installation time with only two holes to drill and no cutting of the front diff housing. The 6 inch RTs system allows the use of both 18 inch and 20 inch diameter wheels. Use 35/13.50R18 tires w/ 18x9 wheels w/ 5 3/4 inch BS w/ minor trimming. Use 35/13.50R20 tires w/ 20x10 wheels w/ 5 3/4 inch BS w/ minor trimming. Use 355/65R18 tires w/18x9 wheels w/5 3/4 inch BS w/minor trimming. Use 37/13.50R20 tires w/20x10 wheels w/5 3/4 inch BS w/minor trimming. Fits extended and crew cab models only.