Icon Vehicle Dynamics 3.0 VS Remote Reservior CDCV Coilover Kit - 58775C

PRODUCT OVERVIEW

ICON's 3.0 Series Coilovers with CDCV for 2022-2023 Toyota Tundra are designed to take the off-road capability of the truck to new levels by increasing wheel travel by up to 40% and significantly improving the damping ability of the front shocks.

3.0 Series shocks boast 50% more piston surface area in the ride zone of the shock's travel, and 100% in the "Bump Zone", compared to 2.5 Series shocks. This translates into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions. The multi-stage hydraulic Bump Zone featured in these 3.0 Series shocks exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles.

ICON's exclusive Compression Damping Control Valves are included for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. When paired with ICON 3.0 Series rear shocks with CDCV, vehicle control can be precisely dialed in front to rear, resulting in the best overall driving experience.

These 3.0 Series coilovers are designed as an OEM shock replacement, making installation a simple and straightforward bolt-on affair. Built-in ride height adjustability yields 1.25 to 3.25" of front lift height allowing for the fitment of larger, more aggressive wheel and tire combinations. First class ICON manufacturing processes and quality components are used to ensure these shocks function to their maximum potential without issue.

Important notes: OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Wheels: 17x8.5" w/ 5.75" Backspace / 25mm Offset
Recommended Aftermarket Tires: 35" x 12.50" (Minor fender trimming and modifications may be required)
Application note #55: shocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle
Application note #85: advertised lift height ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accessories will alter lift range
Application note #142: not compatible with Tundras equipped with load-leveling rear height control air suspension
Application note #143: not compatible with Tundras equipped with Adaptive Variable Suspension (AVS)
Application note #144: not compatible with TRD-Pro
Application note #145: will not work with hybrid equipped vehicles
Application note #149: for 4WD models without TRD off-road package Icon recommends using Icon diff drop (part# 55156) or using Toyota TRD axles (part# 434200c020 driver / 434100c020 pass). Failure to do so could result in front axle damage. Not required for TRD-Pro.