Icon Vehicle Dynamics 4WD Front 2.5 VS Bolt In Coilover Conversion Kit - 61720E

PRODUCT OVERVIEW

Easily convert your Ford Super Duty to high-performance front coilovers with this easy bolt-in conversion kit. Available for lift heights of 2.5-3" or 4-5.5", these ICON coilovers feature our proven 2.5 VS Series shock technology, custom coil springs engineered specifically for the Ford Super Duty, and of course Remote Reservoirs with CDEV technology built in. An added benefit of this coilover conversion kit is that it allows (but does not require) the use of a secondary shock absorber in the original shock location without any further brackets or apparatus. (CDEV requires IIC Module & Install Kit)

Tech notes:

OE Wheels & Tires Fitment: Yes
Recommended Aftermarket Wheels: ICON Alloys | 17x8.5" w/ 5.00" Backspace / 6mm Offset | 18x9" w/ 5.25" Backspace / 6mm Offset | 20x9" w/ 5.25" Backspace / 6mm Offset
Recommended Aftermarket Tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
TECH NOTE: Only compatible with 4WD models
TECH NOTE: Springs are rated for diesel engines only
TECH NOTE: Removal of the coil centering cup in factory coil bucket required for installation
TECH NOTE: Also requires installation of IIC part number 93500 and CDEV rear shock part number 37705EP
TECH NOTE: Connectivity for optional CDEV secondary front shocks in OE location in addition to CDEV coilovers coming soon!
TECH NOTE: 2020-UP Super Duty models have a lower ride height from the factory than 2017-2019 models. This results in an increase of approximately .75" of additional lift height over ICON's advertised numbers
TECH NOTE: 2020-UP Super Duty sub-models equipped with Tremor package will have lift height range of 1.25-1.75" over stock