ICON Vehicle Dynamics Front 2.5 VS IR Coilover Kit - 48600

PRODUCT OVERVIEW

ICON Vehicle Dynamics V.S. 2.5 Series internal reservoir front coilover shocks are an incredible upgrade for the front end of the 2021-UP Ford Bronco. These adjustable coilovers allow up to 3-4" of lift height adjustability on Broncos without the Sasquatch package or 2-3" of lift over stock Sasquatch equipped Broncos, allowing the use of larger, more aggressive wheel and tire combinations. ICON's Vehicle-specific shock length and valving along with the larger 2.5" shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. When paired with ICON 2.5 Series rear coilovers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Ford Bronco.

Important notes:

OEM Wheels & Tires Fitment: Yes

Recommended Aftermarket Wheels (With Sasquatch Package): ICON Alloys | 17x8.5" w/ 4.75" Backspace / 0mm Offset | 18x9" w/ 5.00" Backspace / 0mm Offset | 20x9" w/ 5.00" Backspace / 0mm Offset

Recommended Aftermarket Wheels (Without Sasquatch Package): ICON Alloys | 17x8.5" w/ 5.75" Backspace / 25mm Offset

Recommended Aftermarket Tires (With Sasquatch Package): 35" x 12.50" (37" tires require coilover bump stop spacers along with minor trimming)

Recommended Aftermarket Tires (Without Sasquatch Package): 35" x 12.50" (Recommend high clearance crash bars part number 42000, 37" tires require coilover bump stop spacers along with trimming and modifications)

Application note #24: Factory UCA's will not align properly past 2.5" of lift. Above 2.5" of lift an aftermarket UCV is recommended.

Application note #132: When running 37" tires use up travel limiters part #611075 in the front

Application note #138: Recommended crash bars part #42000 on non-sasquatch equipped vehicles when running 35" tires

Application note #139: When running 37" tires crash bar removal may be required but is not recommended

Tech notes: Due to increased wheel travel and lift height provided by these coilovers, ICON upper control arms with Delta Joint Pro, part numbers 48400DJ or 48500DJ, are recommended. Other aftermarket front upper control arms may not be compatible, and it is the duty of the installer to verify fitment. Failure to cycle suspension and check for ball joint bind issues may lead to component failure and/or injury.

Not compatible with Bronco Raptor trim