Suspension Upgrades

This carrier bearing relocation kit is required to prevent driveline vibration if your vehicle is equipped with a 2-piece rear driveshaft.Install time: Installation time: 0.5 hourDifficulty level: 1 of 5NotesFor vehicles with 4-6 inches of Lift...

FeaturesSAE 1045 Solid Steel Forged Housing - This is unequivocally the best carbon alloy steel for this application.CNC Machined Housing - Make our parts and bearings dimensionally perfect, eliminating any die wear issues.SAE 4140 hot forged Chromoly...

The TeraFlex 2012-2018 JK: Exhaust Spacer Kit is required for all 2012-2018 JK Wrangler models with 2.5" or more lift to prevent contact between the front driveshaft and the exhaust crossover pipe during suspension down travel. Exhaust Spacers install...

SUPERLIFT's Bulletproof KEVLAR reinforced braided stainless steel brake lines are constructed of a PTFE inner bladder surrounded by a KEVLAR reinforcing braid. They're covered with a rubber sheathing, stainless steel braid, and an outer plastic sheathing...

SUPERLIFT's Bulletproof KEVLAR reinforced braided stainless steel brake lines are constructed of a PTFE inner bladder surrounded by a KEVLAR reinforcing braid.They're covered with a rubber sheathing, stainless steel braid, and an outer plastic sheathing...

Bilstein B8 5100 (Steering Damper) is designed as an upgrade to factory steering dampers on trucks and SUVs. Utilizing our proven design, these steering dampers are able to dampen minute movements in the steering and reduce steering vibrations that...

This 1" thick machined aluminum spacer restores driveshaft spline contact, and should be considered if the vehicle is regularly driven in 4WD, or sees extreme off-road use.Install time: Installation time: 0.5 hourDifficulty level: 1 of 5Driveshaft spacer...

FeaturesSAE 1045 Solid Steel Forged Housing - This is unequivocally the best carbon alloy steel for this application.Knurled Housings - No.CNC Machined Housing - Make our parts and bearings dimensionally perfect, eliminating any die wear issues.SAE 4140...

FeaturesSAE 1045 Solid Steel Forged Housing - This is unequivocally the best carbon alloy steel for this application.CNC Machined Housing - Make our parts and bearings dimensionally perfect, eliminating any die wear issues.SAE 4140 hot forged Chromoly...

Improve the life of the front CV axles on your Toyota Tacoma or Tundra with the BDS differential drop kit. This differential drop kit relocates the differential 1" from the factory location for proper CV shaft/boot operating angles at 3" of lift...

Complete High Strength fastener hardware only for use with Daystar Polyurethane or Daystar Polyurethane w/Kevlar Body Bushing Mount kits.Plated Steel Grade 8 BoltsLocking NutsComplete High Strength fastener hardware only for use with Daystar Polyurethane...

FeaturesSAE 1045 Solid Steel Forged Housing - This is unequivocally the best carbon alloy steel for this application.CNC Machined Housing - Make our parts and bearings dimensionally perfect, eliminating any die wear issues.SAE 4140 hot forged Chromoly...