Synergy Manufacturing 4 Inch Stage 3 Suspension System - 8853-4000

PRODUCT OVERVIEW

Synergy MFG Suspension Systems use a synergistic approach, meaning the combined effect of the components is greater than the sum of the individual parts. The overall performance of the system is the most important factor when we are designing components to work together. Synergy MFG Suspension Systems are complete systems for your vehicle and include all necessary components for the lift height and performance advertised.

The Jeep JT Stage 3 Suspension System is a coil spring 3 & 4-inch lift designed around 40-inch tires for Rubicon models and 37-inch tires for non-Rubicon models (See fender and bump stop spacing recommendations below). This system is designed to be the most capable performance coil spring lift in its price category.

Features:

Multi-rate, progressively wound coil springs increase lift height to 3 & 4 inches over stock. The front and rear coil springs have been designed specifically for the JT platform.
Front and rear control arms are adjustable to allow for caster correction and re-centering of the front axle. The arms are made of 1.75" X .188" Wall 1026 DOM and feature maintenance free dual durometer bushings are used at both ends for uncompromised articulation.
Front and rear bump stop spacer kits are included to provide the necessary clearance required for larger tires. front bump stop spacing is adjustable from 2-4 inches in 1-inch increments without having to remove any hardware.
Front and rear track bar relocation brackets for increased strength and help retain factory ride quality.
Front and rear sway bar link relocation brackets maintain factory sway bar geometry to allow full articulation of the rear suspension and maintain compatibility with stock wheels.
Rear brake lines in the 3 & 4-inch kit allow the suspension to fully articulate without putting unnecessary stress on the lines and fittings.
Suspension components feature a two-stage, abrasion-resistant powder coat finish for maximum durability and corrosion resistance.
100% bolt on components assure an easy, trouble free installation with the use of basic hand tools.
The 4 inch kit comes with front and rear adjustable track bars center the axles on the Jeep, maintains factory geometry and improves lateral stiffness compared to OE track bars.

Notes:

Recommended addition of (8859-12) - Synergy Jeep JL / JLU / JT Sway Bar Link Disconnect Brackets on both Rubicon and non-Rubicon Models to maximize front wheel travel.
Synergy MFG coil springs lift the vehicle the advertised height over stock based on a fully loaded JT Rubicon. Other JT models (non Rubicon/Mojave) will see more lift over stock. These coil springs do not lift taller than advertised. The stock rake based off the Rubicon model is kept to retain its load carrying capacity. If you prefer the vehicle to sit level when unloaded, we recommend adding a small coil spacer to the front (up to 3/4 inch without affecting up travel or causing coil bind, 8017-075).
Synergy MFG is not responsible for maintaining finish of products. Environmental factors will affect rate of corrosion and wear for items advertised to be corrosion resistant. We recommend using protective coatings for all items that will see extended outdoor and off road use. We have had great experience with the Fluid Film product and recommend it and similar products for any items susceptible to damage from corrosion. It is great for keeping double adjuster assemblies working like new and protecting shock bodies from the elements.
Synergy Anti-seize (4118) is recommended on all adjustable steering and suspension components for increased longevity.