Synergy Steering Stabilizer Clamp (1-3/8" OD Tube) - 4050-38

TECHNICAL DETAILS

• Fits factory JK tie rod, Synergy JK tie rod and Synergy TJ/XJ/ZJ/MJ drag link
• CNC extruded and machined from 6061-T6 aluminum alloy
• Black anodized for maximum corrosion resistance
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Notes: Some late model Jeep JK (2011+) factory stabilizers will require the inner bushing sleeve to be drilled out to 1/2" for compatibility. This sleeve is made of hardened steel, so be sure you have the resources to drill it out. Alternatively, an aftermarket stabilizer is recommended
• Synergy Manufacturing 8003-20 clamp, torque the socket head pinch bolts to 20 ft-lbs and " bolt to 75 ft-lbs. Torque the two set screws to 20 ft-lbs. After tightening all fasteners, cycle the steering to full lock in each direction. Carefully check to make sure the stabilizer and the clamp are not going to hit any other components, like the diff cover, track bar, track bar bolt, etc. It may be necessary to flip the body of the stabilizer depending on available clearance