Fabrication & Tools

TECHNICAL DETAILS 97-06 Wrangler TJ/LJ 84-01 Cherokee XJ 86-92 Comanche MJ 93-98 Grand Cherokee ZJ All the brackets necessary for the JK Dana 44 front axle 9/16" lower control arm holes ...

TECHNICAL DETAILS Truss only, no link mounts included Made of 1/4 inch mild steel Spans length of long and short side Bare steel PRODUCT OVERVIEW This heavy duty and light weight truss system is designed...

TECHNICAL DETAILS TJ Front Axle UCA replacement Replace the weak factory Upper Control Arm bracket 1/4" thick steel and gusseted Includes: Daystar Bushings (both sides) This kit is unwelded ...

TECHNICAL DETAILS Front Axle Truss for TJ, LJ, ZJ Axle model: 44 axle Upper control arm mount: Daystar bushings Includes bushing, inner sleeve, and thrust washer for Driver side and bushing, weldable outer...

TECHNICAL DETAILS Currie Johnny joints in upper control arm mount Made of 1/4 inch mild steel Spans length of long and short side Bare steel PRODUCT OVERVIEW This heavy duty and light weight truss system...

TECHNICAL DETAILS 97-06 Wrangler TJ JK rear dana 44 Eliminates track bar 2.63" upper link mounting width High clearance shock position 1/4" thick mild steel truss and brackets for much higher...

TECHNICAL DETAILS For 3.5 inch diameter axle Not factory Dana axle on Wrangler JK 1/4 inch mild steel. Precision CNC cut and bent for great fitment.* Replaces factory bracket for those with 2.0 inch lift or...

TECHNICAL DETAILS For 3.5 inch axle diameter Not factory Dana axle on 07-18 Wrangler JK, 2 & 4 Door Precisely locates rear coil springs in factory location for an easy, measure-free swap when used with Artec JK Rear...

TECHNICAL DETAILS For 3.5 inch axle diameter Not factory Dana axle on 07-18 Wrangler JK, 2 & 4 Door Sold as a pair 2.625 inch mounting width fits common sized Cartridge Joints (Johnny, Flex, Ballistic, etc)...

TECHNICAL DETAILS 2 and 4-door models 1/4 inch thick boxed steel plate 2.625 inch mounting width Provides mounting locations for your lower control arms, shocks and sway bar Grease Sold as a pair PRODUCT...

TECHNICAL DETAILS 2 and 4-door models 1/4 inch mild steel CNC cut and bent for great Works with Rock Krawler X-Factor Long Arm Will only work with ARTEC JK Truss PRODUCT OVERVIEW When used with our JK...

TECHNICAL DETAILS For JL D44 M210 front axle (Rubicon) All JT front axles APEX peaked top design provides more rigidity than a flat top truss design CNC Precision Laser cut from 1/8" mild steel for a lightweight...