Wrangler JK (2DR)

These Rear Long Travel Upper Shock Mounts relocates upper shock mount up 2" and back 2.50" which allows the use of a longer rear shock for more travel, or to regain lost up travel when moving lower shock mounts up for improved ground clearance. Designed...

Kit features Softride® front and rear Coil Springs along with front and rear Track Bar Brackets. Also includes front and rear Lower Control arms with Greaseable Bushings. Lower front Control arms are Formed from ¼" Wall DOM Tubing. Kit comes complete...

The uniquely designed progressive rate coil springs lower the center of gravity 2-2.5” while providing improved handling and cornering characteristics. 4x4 capabilities are maintained while enhancing your street appearance. Many states have laws that...

EVO HD SwayBar EndLinks are made of solid hex bar and are adjustable in length. They come with 1/2" studded Teflon lined rod ends, 3/4" hex bar linkage and all necessary hardware. Offered in lengths ranging from 5.5" to 15.9" Use these to beef up a very...

Fabtech offers a 3" Budget System for Jeep JK's that includes four American made Coil Springs that have been designed to clear 35" tall tires. The Coil Springs are specific to 2 or 4 door models and undergo a "preset" manufacturing process to insure a...

Suspension limiting straps are the best way to limit suspension travel and prevent premature drive train failure. These limiting straps are constructed with double looped, high-strength webbing. Heat treated 4130 mounting tabs feature a reinforced buckle...

Color: BlackShocks Included: Without ShocksLift Height Range: 0 - 2.5 inchIncluded Parts: Coil SpringsShipping Weight: 20lbShipping Dimensions: 24in x 12in x 6in (L x W x H)

This is the EVO MFG High Clearance Long Arm Kit for EVOlever equipped Wrangler JK's. This system was designed to enhance the EVOlever Suspension System. With the use of this kit you can now have the ability to remove your low hanging rear control arm...

The EVO MFG JK Rear Rockstops brackets are a rear air bump stop system specifically designed to fit with the 2007 and newer Jeep Wrangler JK's. The addition of air bumps allow for suppressed bottoming out forces which therefore transfers less motion and...

Color: BlackShocks Included: Without ShocksLift Height Range: 3 - 4.5 inchIncluded Parts: Coil SpringsShipping Weight: 25lbShipping Dimensions: 24in x 12in x 6in (L x W x H)

The EVO MFG Rear Bumpstop Kit is precision laser cut from 3/16” steel tube with internal strengthening gussets. The offset bump stop pad increases clearance with rear factory trackbar mount. Bolt on installation to the rear axle Black powder coated...

The EVO MFG Rear Roll Center Correction bracket raises the rear trackbar at the axle correcting roll center after lifting the vehicle. Correcting roll center improves on and off road handling and restores the axle to its centered location. Can be used...