Wrangler JK (2DR)

EVO HD SwayBar EndLinks are made of solid hex bar and are adjustable in length. They come with 1/2" studded Teflon lined rod ends, 3/4" hex bar linkage and all necessary hardware. Offered in lengths ranging from 5.5" to 15.9" Use these to beef up a very...

Fabtech offers a 3" Budget System for Jeep JK's that includes four American made Coil Springs that have been designed to clear 35" tall tires. The Coil Springs are specific to 2 or 4 door models and undergo a "preset" manufacturing process to insure a...

Suspension limiting straps are the best way to limit suspension travel and prevent premature drive train failure. These limiting straps are constructed with double looped, high-strength webbing. Heat treated 4130 mounting tabs feature a reinforced buckle...

Color: BlackShocks Included: Without ShocksLift Height Range: 0 - 2.5 inchIncluded Parts: Coil SpringsShipping Weight: 20lbShipping Dimensions: 24in x 12in x 6in (L x W x H)

This is the EVO MFG High Clearance Long Arm Kit for EVOlever equipped Wrangler JK's. This system was designed to enhance the EVOlever Suspension System. With the use of this kit you can now have the ability to remove your low hanging rear control arm...

The EVO MFG JK Rear Rockstops brackets are a rear air bump stop system specifically designed to fit with the 2007 and newer Jeep Wrangler JK's. The addition of air bumps allow for suppressed bottoming out forces which therefore transfers less motion and...

Color: BlackShocks Included: Without ShocksLift Height Range: 3 - 4.5 inchIncluded Parts: Coil SpringsShipping Weight: 25lbShipping Dimensions: 24in x 12in x 6in (L x W x H)

The EVO MFG Rear Bumpstop Kit is precision laser cut from 3/16” steel tube with internal strengthening gussets. The offset bump stop pad increases clearance with rear factory trackbar mount. Bolt on installation to the rear axle Black powder coated...

The EVO MFG Rear Roll Center Correction bracket raises the rear trackbar at the axle correcting roll center after lifting the vehicle. Correcting roll center improves on and off road handling and restores the axle to its centered location. Can be used...

The EVO MFG Rear Bumpstop Kit is precision laser cut from 3/16” steel tube with internal strengthening gussets. The offset bump stop pad increases clearance with rear factory trackbar mount. Bolt on installation to the rear axle Black powder coated...

Give your Jeep Wrangler JK the additional ground clearance you need with a ICON Vehicle Dynamics 2in Rear Coil Spacer Pair. These purpose-built polyurethane spacers were specifically designed for use with OE coil springs. They will give your Jeep an...

Skyjacker® is proud to announce their new bolt in Skyjacker® LeDuc Series coil-overs that are tuned and tested by Curt LeDuc with application specific valving for maximum performance on and offroad. This new series of coil-overs can be purchased as kit...