2015

The TeraFlex Front Tera60 Full-Float Axle Housing Assembly with Locking Hubs & 8x6.5 Bolt Pattern for JK Wrangler with 0-6" Lift is a direct bolt-on upgrade for JK Wrangler owners looking to replace weakened, strained, or damaged front axles in JK...

The TeraFlex Front Wide Tera60 Full-Float Axle Housing Assembly with Locking Hubs & 8x6.5 Bolt Pattern for JK Wrangler & Unlimited with 0-6" Lift is a direct bolt-on upgrade for JK Wrangler owners looking to replace weakened, strained, or damaged...

Upgrade your JeepÂ’s drivetrain with the Rough Country Rear CV Drive Shaft. This 100% bolt on driveshaft was specifically engineered for use with late model 4-door JK Wranglers. With a heavy-duty design and Brute Force Red Seal u-joints, this drive...

The OMIX Front Dana 44 Locking Differential is a direct replacement for the broken or worn factory locker in your 07-18 Jeep Wrangler JK. Featuring a direct bolt in installation including all bearings and hardware needed for install, this electronic...

TEN Factory™ Ring & Pinion Installation Kit offer everything you will need to do your ring & pinion installation. Axle Model: Dana 30Axle Position: FrontShipping Weight: 2lbShipping Dimensions: 12in x 11in x 2in (L x W x H)

Shipping Weight: 4.27lb

These Jeep® JK lower control arm skid plates will protect and strengthen the lower control arm bracket assembly from bending and prevent and damage. The 1/4" thick CNC laser cut brackets are designed to be welded on for superior strength and durability...

TEN Factory™ Ring & Pinion Installation Kit offer everything you will need to do your ring & pinion installation. Axle Model: Dana 44Axle Position: FrontShipping Weight: 2lbShipping Dimensions: 12in x 11in x 2in (L x W x H)

The Crown Automotive Header Opening Seal is a direct fit replacement for JK Wrangler's and will keep the wind and water out of the interior of your Jeep. This seal is located on top of the windshield frame and makes contact with the soft or hardtop...

The JK Axle Sleeve Kit was created as a way to reinforce the weak factory axle tubing. The sleeves are designed to slide inside the factory tubes and provide increased durability and support throughout the axle. This prevents unwanted bending or breaking...

Got bigger wheels and tires and still need more power from your Jeep JK? The Crown Automotive 4.88 Ration Dana 30 Ring and Pinion is a replacement for a previous upgrade or a perfecting starting place for your first gear swap. This ring and pinion...

The 2Low shift kit is designed similar to our popular 2Low for the 231 transfer case. This shifter will allow the 241OR case to have one more low range position for true 2WD Low Range to allow for tighter turning, easier front steering, and will help to...